ChefsChoice Diamond Hone EdgeSelect 120:

Note: Chrome & Platinum finishes cost $10.00 extra. Metal & Brushed Metal finishes cost $30.00 extra.

This professional electric knife sharpener is another sharpening breakthrough. It incorporates conical 100% diamond coated disks in Stages 1 and 2 and a revolutionary stropping/polishing disk in Stage 3. In just seconds, an edge of unprecedented sharpness and durability is obtained on fine edge (straight edge) and serrated knives. The flawless, highly polished fine edge can be customized to suit the cutting task. High precision elastomeric angle guides eliminate all guesswork.

Three-year limited warranty. UL/ETL and Canadian Approval. Assembled in the U.S.A.

SEE BELOW FOR A LIMITED TIME OFFER: free Diamond Hone MultiEdge Knife Sharpener Model 460

Frequently Asked Questions

Less expensive sharpeners do not work, can harm knives or leave them dull. The Model 120 incorporates 100% diamond coated disks in the first 2 sharpening stages and a patented stropping/polishing stage 3 that guarantee an astonishingly sharp edge. There is no other sharpener that will do as fine a job on straight edge and serrated knives as a Chef'sChoice.

2. Is it safe to sharpen expensive cutlery with the Chef'sChoice Model 120?
Yes. The Chef'sChoice Model 120 will safely sharpen expensive or inexpensive cutlery. It will sharpen knives manufactured from the hardest alloys.

3. Will the Chef'sChoice Model 120 cause excessive wear to my knives?
No. Ninety-eight percent of your re-sharpening takes place in Stage 3. The ultra-fine, flexible abrasive in this stage removes only microscopic amounts of metal. In fact, when compared to other sharpening methods, the Chef'sChoice 120 removes much less metal. There is no other way to sharpen and remove less metal.

4. Do I need to use a steel or professional sharpening service to help keep my knives sharp?
No. In fact, a steel, which has no angular control, will deteriorate the super fine edge obtained by the Chef'sChoice 120, and the use of a professional sharpening service is unnecessary once you own a Chef'sChoice sharpener.

5. Do the diamond abrasives and stropping/polishing stage wear out, and how would I replace them?
The abrasives will last for many, many years without need for repair or replacement. If the abrasives need replacement, you may send the sharpener back to EdgeCraft and, for a nominal fee, EdgeCraft will replace the abrasives, clean and lubricate the sharpener and ship it back. The abrasives, however, should last a very long time with normal household use.

6. Can the abrasives be cleaned?
The Stage 3 stropping/polishing disks can be restored to "as-new condition" if they become dirty and/or glazed. A unique cleaning/dressing tool can be actuated using the lever in the back of the sharpener.

7. Will the Chef'sChoice Model 120 sharpen serrated knives?
Yes. The Chef'sChoice 120 is designed to sharpen both straight edge and serrated knives. It straightens, re-aligns and sharpens the serrated tips in stage 3. TIP: A straight edged knife sharpened on the Chef'sChoice 120 will do a much cleaner job of cutting a tomato or a loaf of bread than a serrated knife.

8. Does the Chef'sChoice Model 120 sharpen scissors?
The Chef'sChoice® 120 will not sharpen scissors, however, EdgeCraft does manufacture a scissors sharpener, the ScissorPro Model 500, which incorporates 100% diamond abrasives and similar technology to produce an incredibly sharp edge.

9. Does the Model sharpen pocketknives or hunting knives?
Yes. The Chef'sChoice Model 120 will sharpen pocketknives and hunting knives that can comfortably fit in the sharpening slots.

10. How often should I use the Chef'sChoice Model 120?
If your knives are dull, resharpen them according to the instructions given in your manual. You may use Stage 3 for resharpening whenever your knives lose that razor-sharp, ultra-fine cutting edge. It takes approximately 15-30 seconds to resharpen a knife. You do not have to worry about excessive wear because the amount of metal removal during resharpening is negligible.

11. Is the Chef'sChoice Model 120 easy to use?
Yes, the built-in elastomeric springs precisely hold the knife blade securely against the angle guides, eliminating all guesswork.

12. Who manufactures the Chef'sChoice Model 120?
The Model 120 is injection molded and assembled at the EdgeCraft Corporation, located in Avondale, Pennsylvania in the U.S.A. The company was founded in 1984 and manufactures many fine small kitchen appliances under the Chef'sChoice brand.

FOR A LIMITED TIME: includes free Diamond Hone MultiEdge Knife Sharpener Model 460

• 2-Stages: separate sharpening and honing stages for sharper, longer lasting edges.
• 100% diamonds, the hardest known material, sharpen faster than any other abrasives, creat sharper edges and never detemper the knife edge.
• Model 460 sharpens the full blade length, tip to handle.
• Advanced precision angle guides for sharper edges with no guesswork
• Safe for quality knives.
• Easy to use-right or left handed.
• Made in the U.S.A.